Our worm gear reducers offer a choice of a good or hollow output shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, nevertheless, can withstand shock loading better than other reduction gearbox designs, making them perfect for demanding applications.
Tough compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Stable or Hollow output shaft
Adjustable mounting position
Worm Gear Quickness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s quickness reducer products – has recently been serving industry reliably for over 40 years. Its tested modular design has set the sector standard for overall performance and may be the most imitated item in today’s worm gear speed reducer marketplace. But why settle for a knock-off when you can have the initial – from EP Gear.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure confident, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow convenient fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) will be an ideal meet for motors with huge insight speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales staff for help determining which gearbox alternative is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and allow for a corner change with optional dual output. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our correct angle planetary gearboxes provide a robust solution. The proper angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest procedure of our swiftness reducers. These gearboxes are designed to manage varying loads with little backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic-type material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest efficiency and best result torque of all our velocity reducers. These gearboxes are designed to manage varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we’ve a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the top choice for constant duty applications. Their equipment cluster design provides a highly effective method for dissipating heat. Parallel shaft gearboxes possess the shortest amount of our inline gear reducer options therefore they work very well in environments with limited space. Our parallel shaft equipment reducers provide an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, speed reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement in which a equipment in the type of a screw, also called a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are metal or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are considerably smaller than other gear reduction boxes. A major benefit of worm equipment reducers can be that they create an output that’s 90° from the input and can be used to transmit bigger torque or decrease rotational speed. Most often, a worm gearbox offers right hand threads; to improve the direction of the output, a left-hands thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio

Did you locate just what you were looking for regarding worm reduction gearbox? You could locate even more details on our site.