China Wholesale Wpa Worm Shaft Reducer Wp Series Worm Gear Reduction Gearbox agnee worm gearbox

Merchandise Description

WP worm gearbox is a new generation solution produced by our factory on the foundation of improving WJ sequence goods and combining innovative systems at property and overseas. The physical appearance adopts innovative square box framework. Its shell is produced of higher quality cast iron. Little volume, light fat, high radiation performance, substantial output torque, easy operation, low sound. It fits all positions.
The goods are widely used in the making equipments of all types of industries within and exterior China. They are the best alternatives for presently modern day services of mechanical reducing generate handle to realize huge twisting distance, massive equipment ratio, small noise, large performance and steadiness.
one. Characteristics:
1) Substantial top quality aluminum alloy Motovario like equipment box, mild fat and non-rusting
2) Large output torque, steady transmission with lower noise
3) Large heat-radiating deficiency, stylish form, sturdy provider daily life and modest measurement
4) Ideal for omni-bearing installation
two. Advantages:
1) Smooth in working and tiny in volume 
two) High in radiating efficiency 
3) Durable in services life 
four) Operate extended time in dreadful condition 
5) Totally sealed and non-rusting
three. Installation
one)The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
two)The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3)The diameter tolerance zone of input and output shaft is H6, the holes of fitness(such as couplings, belt-pulley, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
four)Drivers such as sprocket wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
five)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
six)When ordering or using all kinds of WPD type, if the motor weight is binger than the common, supporting set is required.
four. Utilization
Before using,please check carefully whether the reducer model, distance, ratio, input connecting method, 
output shaft structure, input and output shaft direction and revolving direction accord with required.

Complex info: 
Torque: 2N.m-3571N.m 
Input velocity: 1000r/min, 1500r/min 
Output speed: .thirty-419r/min 
Electrical power: .04KW-15KW

WP reducer, divided into normal WPS collection, normal WPD collection, regular WPA, WPO,WPDA,WPDO,WPDS,WPDS and so on. WP worm equipment and worm reducer is created on the basis of WD reducer, the worm is made of 45 # high good quality steel after warmth treatment processing and production, worm equipment with tin bronze cast, wear-resisting performance is good, particularly on the bearing ability is more evident, worm gear and worm reducer is mainly used in plastics, metallurgy, beverage, mining, lifting transport, chemical reduction push construction and other mechanical tools.
Rewards
one.Easy transmission, vibration, influence and noise are tiny, speed reduction ratio, extensive versatility, can be utilised with a assortment of mechanical tools.
two.Can be a single level of transmission to acquire a more substantial transmission ratio, compact structure, most designs of reducer has a very good self-locking, braking needs of mechanical gear can conserve the braking system
3.worm tooth tooth meshing friction decline is massive, so the transmission effectiveness is decrease than the gear, easy to warmth and large temperature.
4.Higher requirements for lubrication and cooling.
five.Good mutual compatibility, worm gear and worm are made according to national standards, bearings, oil seals and other standard parts.
6.The box body kind contains basic kind (the box physique is vertical or horizontal kind with foot board) and common kind (the box entire body is cuboid, with fixed screw holes on multiple sides, with out foot board or another foot board, and so forth.).
seven. There are 2 connection modes of enter shaft: standard kind (single input shaft and double input shaft) and motor flange.
eight. The position direction of the output and enter axes is below and over the input axes Output shaft up and down Input axis up and down.
nine. Two or 3 reducer sets can be used to type a multistage reducer to receive a optimum transmission ratio.
 

Design: WP40,fifty,sixty,70,80,a hundred,a hundred and twenty,135,155,one hundred seventy five,two hundred,250
Ratio: one:ten,15,twenty,twenty five,30,40,50,sixty
Coloration: Green Or Buyer Ask for
Sound: reduced noise (<50DB)
Advantage: Productive and risk-free working

Substance:

Housing:Solid iron and Copper alloy
Worm Equipment-Bronze 9-4#
Worm with carburizing and quenching, floor harness is 56-62HRC
Shaft-chromium steel-45#
Packing: Carton and Wooden Case
Bearing: C&U Bearing
Seal:                       NAK SKF
Certificate: ISO9001,CE,3C,OEM
Guarantee: twelve months
Input Power:    .06kw, .09kw, .12kw, .18kw, .25kw, .37kw, .55kw, .75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       
Usages: Industrial Device: Food Things, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange: 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant: Artificial & Mineral


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Worm
Step: Single-Step

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model: WP40,50,60,70,80,100,120,135,155,175,200,250
Ratio: 1:10,15,20,25,30,40,50,60
Color: Green Or Customer Request
Noise: low noise (<50DB)
Advantage: Efficient and safe operating

Material:

Housing:Cast iron and Copper alloy
Worm Gear-Bronze 9-4#
Worm with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing: Carton and Wooden Case
Bearing: C&U Bearing
Seal:                       NAK SKF
Certificate: ISO9001,CE,3C,OEM
Warranty: 12 months
Input Power:    0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       
Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange: 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant: Synthetic & Mineral

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Expansion
Gear Shape: Worm
Step: Single-Step

###

Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Model: WP40,50,60,70,80,100,120,135,155,175,200,250
Ratio: 1:10,15,20,25,30,40,50,60
Color: Green Or Customer Request
Noise: low noise (<50DB)
Advantage: Efficient and safe operating

Material:

Housing:Cast iron and Copper alloy
Worm Gear-Bronze 9-4#
Worm with carburizing and quenching, surface harness is 56-62HRC
Shaft-chromium steel-45#
Packing: Carton and Wooden Case
Bearing: C&U Bearing
Seal:                       NAK SKF
Certificate: ISO9001,CE,3C,OEM
Warranty: 12 months
Input Power:    0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw       
Usages: Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,
Woodworking,Glass.
IEC Flange: 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant: Synthetic & Mineral

Is a worm gear reducer gearbox right for your application?

If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Wholesale Wpa Worm Shaft Reducer Wp Series Worm Gear Reduction Gearbox     agnee worm gearboxChina Wholesale Wpa Worm Shaft Reducer Wp Series Worm Gear Reduction Gearbox     agnee worm gearbox
editor by CX 2023-04-06