Working principle of gear reducer 　　The gear reducer uses all levels of gear transmission to achieve the purpose of speed reduction. The reducer is composed of various levels of gear pairs. For example, a small gear can be used to drive a large gear to achieve a certain deceleration purpose, and then a multi-stage structure is adopted. , The speed can be greatly reduced. The scope of application of the reducer:

　　1. The high-speed shaft rotation is not more than 1500 rpm.

　　2. The circumferential speed of the gear drive is not more than 20 m/s.

　　3、工作环境温度为-40-45℃，如果低于0℃，启动前润滑油应预热至0℃以上。
　　4. The gear reducer can be used to run in both forward and reverse directions.

Machine characteristics

　　1. The gear is made of high-strength low-carbon alloy steel by carburizing and quenching. The hardness of the tooth surface is HRC58-62. The gears are all CNC gear grinding technology with high precision and good contact.

　　2. High transmission rate: single-stage greater than 96.5%, double-stage greater than 93%, and three-stage greater than 90%.
　　3. Smooth operation and low noise.
　　4. Small size, light weight, long service life and high carrying capacity.
　　5. Easy to disassemble and inspect, easy to install