Worm get gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where a simple to fit, high torque result is required. Ideal for student based projects including robots and buggies.
The unit has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The motor is snap installed into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and additional applications where huge torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to some amps, making them perfect candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, actually at very low voltages. We recommend that you use stall-detection sensors, or just watch your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, though it is not particularly intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right angle worm geared motors set new requirements for reliability, effectiveness and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration today and a really future proof answer. The Ever-Power gear electric motor offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in alternative positions rotated in 90º steps around the engine frame providing for unparalleled integration opportunities.
Ever-Power gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total answer for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the answer for applications requiring a corner turn, optional dual output, or an inability for the motor to be back again driven. The DC right angle equipment motors are created for constant and intermittent duty operation. Our right angle equipment reducers were created with a number of mounting plate choices, making them well suited for a variety of DC engine based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a small package size. Worm Gear Motors are great for applications that require a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power applied. On top of that, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision minimize gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Items will work with you to design and produce a Worm Gear Engine which will optimize the efficiency of your unique application.
Built to your unique requirements
Engine Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Lower / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for toughness and a higher torque output. Because of the special mechanical framework of the worm drive the engine output shaft is usually self locking and will not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and can attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially display their power in applications where great gear ratios are necessary. Our worm geared motors happen to be therefore optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its own unique requirements. The EP series worm gear motors can be quickly and effectively adapted to satisfy your needs.
Worm gear models impress with their high power density and compact style. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive line of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These can be easily field installed, but we may also be happy to assemble the average person components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear units feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product preferably suited for harsh and challenging industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units possess on all sides several fixing possibilities and enable an easy assembling for the client.
Other drive configurationscan be designed by use of built-on add-ons (e.g. torque arm and result flanges). The housings are made in light weight structure out of aluminium die cast. Motor attachment is realised generally by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm large, 40mm high, a good robust worm get gearbox powered by an MM28 electric motor (included), most suitable for applications where a simple to fit, high torque result is necessary, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, ideal for student based projects including robots and buggies.
Most suitable for applications where an easy to fit, high torque productivity is required
Ideal for student based projects including robots and buggies
Reversible Substantial torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Huge torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The motor is Gear DC motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that’s, regarding motor without electric, the productivity axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where huge holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely an improved option compared to the spur gear motor. How come worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (input shaft vs output shaft) is not reversible when using large reduction ratios, because of the higher friction involved between your worm and worm-wheel, when usually an individual start (a single spiral) worm can be used. This is often a advantage when it is desired to get rid of any likelihood of the result driving the input.”
In other words, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Click view independent evaluations about worm motor.