Single reduction worm gearing offers high ratio reduction with couple of shifting parts in a close-coupled small drive. The right angle arrangement of driving-to-driven machine requires a minimum of space. Input and output shafts can be prolonged in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient engine speeds are reduced to gradual speed requirements of many industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive utilization of the involute Helicoid Thread form (with leaving side contact) on the worm and gear offers high efficiencies, and long service life. The hardened ground and polished alloy steel worm develops a easy, work hardened surface on the bronze gear. Because of this worm gears wear in and improve with prolonged service while various other gears are deteriorating. EP offers a wide collection of model configurations, sizes, ratios, and components from our standard product line.
Fabricated Designs
If the application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile apparatus applications) EP can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide maximum rigidity and strength which allows the tranny of higher horsepower levels than are feasible with standard cast iron products. Extra heavy aspect plates connect the worm and equipment shaft bearing facilitates, assuring proper meshing of the gear under all load circumstances. In smaller sized sizes, fabricated metal reducers are interchangeable with EP standard cast iron reducers.
Custom Designs
EP can provide custom acceleration and reversed engineered reducers for the application, be it a new project or a primary drop-in alternative to a competitor’s quickness reducer. Fabricated metal reducers allow EP to match a competitor’s footprint, centerline, and shaft height allowing a direct drop-in alternative saving the customer time and money.
Long – Quiet Life
All worm gears in EP reducers are manufactured from phosphorous bronze. Our design also includes a hardened, ground and polished alloy steel worm. This combination develops a clean, work-hardened mating surface area of the bronze gear which increases with prolonged service.
Worm gearing is a class of equipment reducers that utilizes correct angle, nonintersecting shafts. This style of reducer provides clean and quiet procedure and allows for the probability of large acceleration reductions. These gears can be found from stock in a wide selection of ratios, from as low as 4:1 to as much as 3600:1. The small design and structure allows worm equipment reducers to be placed in a relatively small space. Thus, very high reductions in a limited package size can be achieved with this configuration. Our worm equipment features the continuous sliding tooth action between worm and the teeth. This escalates the tolerance for large loads and shock loads. Worm gear drives offer users high reducing convenience of relatively low cost when compared to various other types of gearing.
The usage of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that utilize worm gearing are: conveyors, mixers and bucket elevators.
EP worm gear reducer gearbox series foundation on years of experiences uses designed teeth surface area with unsurpassed torque transfer functionality with great overall performance, efficency and cost.Worm gear program transmits power through sliding get in touch with, leading to extremely low vibration , sound, little backlash and self-locking property
-Housing:One time we casting creats great rigidity for serious impacts. Outer cooling fins and inner lubrication essential oil diversion channel style to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one type of reduction gear package which includes a worm pinion insight, an output worm equipment, and includes a right angle result orientation. This type of reduction gear package is generally used to have a rated motor acceleration and create a low speed output with higher torque worth based on the decrease ratio. They often times can resolve space-saving problems since the worm equipment reducer is one of the sleekest reduction gearboxes available because of the small diameter of its output gear.
worm gear reducerWorm equipment reducers are also a popular type of swiftness reducer because they offer the greatest speed decrease in the smallest package. With a higher ratio of speed decrease and high torque result multiplier, it’s unsurprising that many power transmission systems utilize a worm gear reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical testing equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm equipment reducer, the SW-1 and the SW-5 and both can be found in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with tough compression-molded glass-fill up polyester housings for a durable, long lasting, light weight speed reducer that’s also compact, noncorrosive, and nonmetallic.
Features
Our worm gear reducers offer a choice of a solid or hollow result shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can endure shock loading much better than other decrease gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also referred to as worm gearbox or worm swiftness reducers. Worm gear reducers are utilized for speed reduction and increasing the torque for electric powered electric motor drives. You can choose to install your NEMA electric motor to the reducer by using the NEMA C face flange or make use of a coupling. If you want a coupling for the result or input shaft discover our coupling section for selecting a coupling. We offer four assemblies left hands and right hand and double output shaft and shaft input and shaft result. Interchangeable with many worm gear manufactures. See data sheet in item overview for diamensions. Unless you see your type, make sure you Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
EP DDVM series triple-reduction worm gear rate reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes on request). Result torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are ideal for water/waste-water tools drive applications such as thickeners and clarifiers, which require a vertical straight down shaft. Other offered configurations also make EP triple decrease reducers perfect for use on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or materials handling systems where large torques/gradual speeds are needed.
These reducers are also offered with a helical principal reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow swiftness, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm gear reducers are found in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, left or dual output shafts or a hollow bore output. The indirect drive versions are shaft input-shaft output boxes for use with sprocket or pulley drive systems. They offer an effective low priced solution to speed reduction and improved torque, with higher tolerances for shock loading than helical equipment reducers.
In order to select a gearbox speed reducer, you will have to determine the required torque and provider factor for the application form. Click on “Specs” above for a table that will assist in determining the service element. For service factors above 1.0, multiply the mandatory torque by the support factor.
Our regular 700 Series – the heart of EP swiftness reducer products – has been serving industry reliably for over 40 years. Its tested modular design has set the industry standard for efficiency and may be the most imitated item in today’s worm gear speed reducer marketplace. But why accept a knock-off when you can have the initial – from EP.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision during worm and gear alignment.
EP 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without external ribs, is made from close-grained cast iron and for rigid equipment and bearing support. It also offers excellent temperature dissipation.Double lip, spring-loaded seals guard against oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and floor alloy steel worm made intregal with the shaft for long and trouble-free life.Oil sight gauge for ease of maintenance (not available upon sizes 25 and 34).Factory oil packed.Every unit test run prior to shipment.Universal installation with bolt-on foot.Highly modifiable design.All this at substantially reduced prices than you have been accustomed to spending money on reducers of lesser quality. Less